Additive Manufacturing of Patient-Specific Masks and Nasal Prongs to Improve Pediatric Ventilation Outcomes and Reduce Pressure Sores - In this Fast-track SBIR Actuated Medical, Inc., is partnering with the Children’s Hospital of Philadelphia
(CHOP) and Akron Children’s Hospital (ACH) to develop processes to manufacture better fitting masks and
nasal prongs for Non-invasive Ventilation (NIV) delivery to young pediatric patients (1 month to 9 years of age).
NIV provides breathing support without the use of an endotracheal or tracheostomy tube. NIV is delivered by
interfaces (a mask or nasal prongs). Generally, masks only cover the nose to mitigate potential aspiration
concerns should a patient vomit. Nasal prongs are intended to achieve a 100% occlusive fit within a patient’s
nare. For both masks and prongs, the goal is to deliver airway support maintaining positive-end expiratory
pressure (PEEP). Poorly fitting masks can lead to non-compliance, patient–ventilator dys?synchronies, skin
damage, pain, craniofacial skeletal issues, and can also result in delivery of sub-optimal pressures or tidal
volume, which can adversely affect ventilation outcomes, particularly in the home care setting. Additionally,
poorly fitting NIV interfaces can require them to be strapped to patients tightly to offset the inferior fit, which can
lead to pressure ulcers, skin damage, or septum injury (in the case of nasal prongs). While many NIV delivery
methods exist for neonatal patients (3 available mask and 11 nasal prong sizes), there are no sizes designed
specific to young pediatric patients (1 month to 9 years old) that are equipped with appropriate headgear. The
validation process to stand up a manufacturing approach is costly and time consuming for a relatively small
market, limiting the interest of major manufacturers to fill these gaps. Three main limitations arise when
addressing the needs of younger patients: 1) the size gap between neonatal and adult interfaces leave poor
solutions for young pediatric patients, 2) variation in patient facial structure results in NIV interfaces being
pushed too firmly against the face in an attempt to eliminate or reduce air leakage, and 3) craniofacial
anomalies (CFAs) (e.g. cleft lip) further limit the ability to achieve a good seal. An approach is needed that will
produce NIV interfaces that address these gaps, while being FDA-compliant and still economically feasible.
Phase I. Hypothesis. Pediatric-specific sized NIV mask and prongs can be manufactured using 3D printing
methods to improve ventilation outcomes in benchtop models. Aim 1. Verify improved performance of
pediatric-sized NIV devices fabricated through facial scanning and injection molding process. Aim 2 –
Formulation development and testing for direct 3D printing approach.
Phase II. Hypothesis. Manufacturing NIV devices with 3D printing yields better fitting interfaces that improve
NIV outcomes in young pediatrics. Aim 3 – Validate manufacturing approach for pediatric NIV interfaces. Aim 4
– Finalize direct 3D print approach and evaluate performance with CFAs. Aim 5 – Multi-site human clinical
evaluations (CHOP, n=29; ACH, n=24)
