Project Summary:
Polycyclic Aromatic Hydrocarbons (PAHs) are designated as priority pollutants by the EPA due to
their toxic, mutagenic, and cancer-causing nature. Therefore, the presence of PAHs in waterways and
coastal areas, in and around Superfund sites, poses significant safety hazards. The introduction of
PAHs into sensitive aquatic environments frequently comes as a consequence of chemical and raw
material spills, underwater drilling and mining, natural disasters accelerating runoff from industrial
sites, and improper waste disposal. Environmental persistence, buildup in sediment, and the bio-
accumulation of PAHs through the food chain adversely affect not only marine life, but also human
health. These environmental concerns have generated major demands for effective and innovative
field-deployable devices for detecting PAHs in a sensitive, fast, simple, reliable, and cost-effective
manner. A thorough, real-time monitoring program for the presence of PAHs in areas proximate to
Superfund sites and near spills would improve the efficacy of containment and remediation operations,
helping to ensure that the public is kept safe from toxic compounds. In response to the stated needs
of the NIEHS Superfund Research Program Monitoring, Detection, and Site Characterization, this
proposal describes the development of a device for the specific detection of PAHs using novel
materials developed at the Louisiana State University with a proprietary sensor system engineered at
Seacoast Science. This tool will allow the real-time monitoring of these toxic compounds and improve
public health by enhancing the efficacy of containment and remediation operations, ensuring that the
public is kept safe from toxic compounds in recreational and commercial waterways, and limiting
ingestion of PAHs from consumption of contaminated seafood and drinking water. During the Phase
I work, the concept will be validated against representative PAHs (i. e. perylene, pyrene, benzopyrene)
in the presence of various interfering analytes and aqueous solutions of increasing ionic strength. To
accomplish the Phase I proof of concept work, the following tasks are proposed: synthesis and
characterization of MIP nanoparticles; initial screening/down selection of MIP nanoparticles using a
gravimetric sensor platform; and coating and testing optimum MIP nanoparticles on the proprietary
sensor platform. Seacoast Science seeks to integrate LSU’s MIP-based nanomaterials with a
conductive carbon-allotrope to develop a highly-chemoselective, immersible sensor, whose cost is low
enough to warrant periodic replacement, thereby mitigating long-term biofouling effects.